Wood Hair Brush that is Great For Storage

The idea behind the wood hair brush project was to give Amy a place to store her hair ties and maybe some other small items. The bulk of the hair brush is made of walnut and the “bristles” are made from a dowel. This is a fairly easy project and would be great for a beginner and actually quite fun for the more experienced woodworker as well.

You can get the free template and make your own.

Download Hair Brush Pattern

Check out the video

Wood Hair Brush Image Gallery

Project Details

Materials

  • Walnut – used for the base piece
  • Dowel – used for the bristles
  • Wood glue
  • Finish (we used tung oil)

Tools

  • Band saw
  • Sander
  • Router
  • Drill or Drill press
  • Forstner and Regular Drill Bits

Applying The Wood Hair Brush Pattern

We always use the blue painter’s tape when applying a pattern. It helps with removing the pattern later on. It was layered onto the piece of walnut and then a healthy coat of spray adhesive was added. Next, the pattern (which is available for download above) was applied.

Rough Cutting

After the pattern was secure, we rough cut the shape on the band saw. There was no need to get this precisely on the line since we will clean it up on the sander.

Sanding

To get the final shape we wanted, we shaped the wood hair brush on the strip sander. A belt or disc sander would work as well for this.

Drilling The Holes

Once we had the shape that we wanted we moved on to drilling all the holes. The pattern has a grid on it that can be used for the placement of these holes. For some reason our printer didn’t print that grid, so we just added them on to the template in the shop.

The small holes were drilled to receive a 1/8″ dowel. The handle received a larger hole. This was accomplished with a forstner bit.

Routing The Edges

Once we finalized all of the holes and we were satisfied, we moved on to smoothing over all the edges. We did this with a roundover bit in the router table.

Finishing

Before adding in the bristles we added a coat of tung oil. We did this early on because we figured it would be difficult to get the finish down between the bristles once they were in place.

Cutting and Adding the Bristles

We setup a tape line on the bandsaw and then cut 1/8″ dowels to our desired length. Having the tape in place allowed us to replicate the same length multiple times. After making enough to fill all the holes, we finished those in tung oil as well, leaving a little area unfinished. This end will be glued into the hole.

We put a little would glue in each hole and tapped them in gently using a block of wood. Some of them did break, so make sure you make a few extras.

All Done!

The large hole in the brush allows for easy hanging and the bristles are great for storing hair ties or any other small objects. The coolest thing about this project is that it only took an hour or so to make.

We hope this project inspired you to try something new or that it was helpful to you in some way. If it was, let us know in the comments below or share your project with us on Facebook, Twitter or Instagram. Also, if you would like to help support more DIY projects, like this one, please share this with your friends and family or consider subscribing on YouTube.

Leave a Reply

Your email address will not be published. Required fields are marked *