I have a long list of project ideas that I work off of. One of the things that has been on my list for quite a while was simply noted as “storm trooper art piece” or storm trooper wall art, rather. This past weekend we visited our local Habitat for Humanity Re-Store, which if you are not familiar with that, it is kind of like a thrift store for building materials, furniture, etc. While we were there we found out that they had a few pallets of 1/4″ plywood they were giving away for free. They were about 2′ x 4′ pieces. Some were in rough shape some were… okay. I decided, since they were free, that I would take some. Amy and I loaded up about 20-30 small sheets and hit the road. Once I got home and started thinking about what I wanted to do with them, the storm trooper art piece was one of the first things to come to mind.
Materials for this project:
- 1/4″ plywood (reclaimed if possible)
- 1 piece of maple hardwood flooring (reclaimed also)
- Pattern (free on our website)
- X-acto knife (or something similar)
- Full page shipping label (or standard paper and spray adhesive)
- Spray paint
- Tools – saw, sander, clamps
- Wood Glue
- Spray Finish
Watch the Storm Trooper Wall Art build video
Often times a step is more easily understood when you can see the whole process. Take a couple of minutes and check out the short build video that we have included. It shows a lot more of the entire build.
Storm Trooper Wall Art image gallery
Applying The Pattern
A really useful material we discovered recently that we have been using for applying templates is using full page shipping labels. They are super cheap on eBay and work great for patterns or templates that you need to stay in place for an extended period. Print the storm trooper wall art pattern onto the shipping label, remove the backing and stick it down. We placed ours onto a partial piece of one of the pieces of reclaimed plywood we got from the Re-store. Another option is to use standard paper and a spray adhesive.
Cutting Out The Storm Trooper Wall Art Pattern
We used and X-acto knife to cut out all the negative space where we wanted the paint to show through. This can be tedious and time-consuming. We suggest hitting play on your favorite playlist and just enjoying the ride. It took about an hour total to cut out the stencil. I takes a combination of cutting and carefully pulling up the pieces you want to remove.
Once we had the stencil completely cut out we grabbed a can of flat black spray paint and sprayed to the whole piece with a generous coat. We kept the can far enough away so that the paint wouldn’t pool up or run.
Removing The Pattern
Once the paint had dried, we removed what was left of the template. This process went much quicker since we didn’t have to be as careful and there was nothing to cut. All we had to do was lift a corner and peel. This is the fun part… the payoff, where you really get to see it come together.
Cutting Excess Material
There was probably a better way to cut this out, but I trust my accuracy on a band saw to a certain degree. That was enough for me to run it through to trim off the excess material where the over-spray occurred.
Making The Frame
The frame was also made from reclaimed materials. It is made from a piece of maple flooring that was removed from a home that was renovated back in 2016. I removed the tongue and groove sides by running it through the jointer. I also passed the face and back through a few time. Once I had it planed down to where I wanted it, I cut it into 3/4″ strips on the table saw. I then measured the recently finished storm trooper and mitered 4 pieces to fit in their respective places around its perimeter.
The mitered frame gets glued into place with wood glue. We were careful with the placement of the glue so that it wouldn’t squeeze up and out onto the storm trooper wall art. Once we had them in place, we clamped the whole piece together using a band clamp.
Once the glue had dried it was time for sanding. We used a combination of hand sanding and the random orbital sander. We got it sanded to a smooth surface and then coated then entire piece with a standard spray semi-gloss finish.
That’s all there is to it. It is an incredibly simple project. It does take a little time because of the pattern, but if you are a fan of Star Wars and you want some storm trooper art on your wall, it is well worth it.
We hope this project inspired you to try something new or that it was helpful to you in some way. If it was, let us know in the comments below or share your project with us on Facebook, Twitter or Instagram. Also, if you would like to help support more DIY projects, like this one, please share this with your friends and family or consider subscribing on YouTube.